Atmel Corporation

Atmel Introduces a Graphical User Interface (GUI) for its Advanced AVR-based 125-kHz RFID Evaluation Kit

    Heilbronn, Germany (ots/PRNewswire) -

    Atmel(R) (Nasdaq: ATML) announced today a significant enhancement to the ATA2270-EK1 125-kHz RFID demo kit. This kit, which enables the evaluation and prototyping of Atmel's wide portfolio of LF IDIC(R)s, has been upgraded to include a PC-based GUI application to be connected directly to the kit's hardware. This new user interface provides an optimized platform for the evaluation and customization of Atmel's RFID solutions used in access control, industrial automation, loyalty cards, anti-counterfeiting, and animal identification. Configuration of Atmel tags in all available modes and the selection of the most suitable RFID solution without advanced knowledge of RF engineering have been made even easier.

    Atmel's ATA2270-EK1 kit contains everything needed to start using an RFID system including several read/write IDIC transponder samples such as the ATA5558, ATA5567 and ATA5577 ISO card devices for contactless identification. It also includes ATA5567 and ATA5577 coin tags, micromodules, and several other form-factors for evaluation. A reader unit using Atmel's U2270B read/write base station IC, in conjunction with Atmel's ATmega128 AVR(R) Flash microcontroller, an antenna, and a power supply with international adapters provide the means to access the tags. An on-board joystick, LCD, and control buttons allow stand-alone usage of the ATA2270-EK1.

    The new PC-based GUI enables detailed evaluations by providing direct access to all the functions of each device. Configuration modes can be easily selected and programmed, and users are warned when modes configured in the transponder IDICs are not compatible with the ASK-based reader IC. Using the software the user can select Animal-ID functionality and the kit can be tuned to the 134.2 kHz required for animal tagging analysis. A special routine included in the AVR firmware enables data to be read and written to the IDICs in accordance with ISO standards 11784 and 11785. Unique format (used for access control), and waste management can also be configured from the GUI. A special "Bit String" form allows users to create and test commands by sending out a bit string to the IDIC. All of these incredibly powerful tools enable the user to control every aspect of the RFID system including the ability to render tags inoperable.

    Thanks to the inclusion of royalty-free source code and Gerber schematics, the ATA2270-EK1 provides a unique prototyping environment for low-cost turnkey solutions, allowing users to develop, implement, and test system-level designs. The ATA2270-EK1 is supported by all the standard AVR development tools such as AVR Studio(R), STK(R)500, JTAGICE mkII, etc.

    Availability and Pricing

    The RF IDIC evaluation kit ATA2270-EK1 with the new PC-based GUI is available now. Pricing starts at US $399 per unit.

      Footnote
      GUI = Graphical User Interface
      ID = Identification
      IDIC(R) = Identification IC (registered trademark of Atmel)
      LCD = Liquid Crystal Display
      LF = Low Frequency
      PC = Personal Computer
      RFID = Radio Frequency Identification

    About Atmel

    Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.

    (C) 2008 Atmel Corporation. All rights reserved. Atmel(R), Atmel logo and combinations thereof, AVR(R), AVR Studio(R), IDIC(R), STK(R) and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

    Information

    Product Information on Atmel's ATA2270-EK1 demo kit may be retrieved at: http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3956

    If you are interested in Atmel's complete RFID product scope, please visit: http://www.atmel.com/products/RFID/

@@start.t1@@        Press Contacts
        Dr. Susanne van Clewe, Marcom Manager Communications and Automotive
         Products
        Tel: +49-7131-67-2081, Email:  susanne.van-clewe@atmel.com
        Helen Perlegos, Public Relations
        Tel: +1-408-487-2963, Email: hperlegos@atmel.com@@end@@

    Web site: http://www.atmel.com

ots Originaltext: Atmel Corporation
Im Internet recherchierbar: http://www.presseportal.ch

Contact:
Dr. Susanne van Clewe, Marcom Manager Communications and Automotive
Products,
+49-7131-67-2081, susanne.van-clewe@atmel.com, or Helen Perlegos,
Public Relations, +1-408-487-2963, hperlegos@atmel.com, both of Atmel



Weitere Meldungen: Atmel Corporation

Das könnte Sie auch interessieren: