Atmel Corporation

Atmel Announces the Only WiMAX Transceiver with Internal Calibration

    San Jose, California (ots/PRNewswire) -

    - Transparent Internal Calibration Improves Performance without Disrupting Operation and Cuts Cost by Eliminating the Need for External Calibration Circuitry or Calibration Software

    Atmel(R) Corporation (Nasdaq: ATML) announced today the third of its  MAX-Link(TM) series of transceivers designed specifically for WiMAX  applications. AT86RF525B and its predecessor, the AT86RF535B, use a  proprietary internal calibration algorithm eliminating the need for an  external calibration circuit or calibration software. The MAX-Link(TM)  transceivers are the only WiMAX specific transceivers on the market today  with internal calibration. Initial startup calibration captures mismatch  effects resulting in lower local oscillator leakage and improved image  rejection. Changes in temperature, supply voltage, or frequency during  operation will cause RF performance degradation and necessitates  recalibration. The calibration routine is continuously performed between  transmit and receive data frames, totally independent from the baseband and  media access control (MAC) processor, to optimize the image rejection and LO  leakage performance characteristics.

    Along with enhanced WiMAX system functionality, the AT86RF525B enables one of the lowest component costs of any RF reference design on the market today. This frequency-agile, single-chip transceiver operates at 2.5GHz with multiple bandwidth options addressing the requirements of WiMAX base stations and subscriber equipment. Internal configuration and control registers can be programmed to integrate with new and existing baseband devices from different vendors. All of the MAX-Link transceivers provide excellent RF performance with low current consumption, low cost, and only a minimum of external components for the RF design.

    On-chip integration techniques combine a low-noise amplifier, power amplifier driver, receive/transmit mixer, receive/transmit filters, voltage-controlled oscillator, synthesizer, receive gain control, and transmit power control all completely digitally controlled. The fully differential design of the transceiver can be configured for either low-IF or zero-IF applications and requires no external filters. The RF reference design incorporates a power amplifier including antenna diversity in a footprint of 40 mm x 35 mm on a 4-layer PCB with components on only one side.

    The fractional-N synthesizer in the AT86RF525B utilizes a unique phase interpolation divider (PID) rather than the more conventional modulus divider architecture. The PID allows for very good frequency resolution and fast tuning speed. The calibrated voltage control oscillator (VCO) can be tuned in less than 10 us to support 100 MHz hybrid frequency division duplexing (HFDD) operations. The synthesizer has the speed and power advantages of an asynchronous divider and is fully programmable within the frequency range of the radio.

    Availability and Pricing

    The AT86RF525B is available now. Pricing starts at US$14.50 in quantities of 10K. For more information please send your request to: wimax@atmel.com.

    About Atmel

    Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.

    (C) 2007 Atmel Corporation. All Rights Reserved. Atmel(R), logo and combinations thereof, and Max-Link, are registered trademarks, or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

    Information

    Atmel's AT86RF525B product information may be retrieved at: http://www.atmel.com/products/wimax/

      Press Contacts
      Vicki McCann, Director Marketing Communications - USA
      Phone: +1-719-540-1724, Email: vmccann@cso.atmel.com
      Helen Perlegos, Public Relations Phone: +1-408-487-2963, Email:
      hperlegos@atmel.com

    Web site: http://www.atmel.com

ots Originaltext: Atmel Corporation
Im Internet recherchierbar: http://www.presseportal.ch

Contact:
Vicki McCann, Director Marketing Communications - USA,
+1-719-540-1724, vmccann@cso.atmel.com, or Helen Perlegos, Public
Relations, +1-408-487-2963, hperlegos@atmel.com, both of Atmel
Corporation



Weitere Meldungen: Atmel Corporation

Das könnte Sie auch interessieren: